Download PDF BrochureAll aircraft mechanics require some type of ground support in order to perform maintenance and servicing of the aircraft. As an Aerospace Ground Equipment (AGE) Mechanic, you will be taught, using typical ground support equipment, the principles of electronics, refrigeration, hydraulics, power generation, reciprocating engines (gasoline and diesel), gas turbine engines, pneumatics, and heating. This will prepare you for servicing, inspecting, troubleshooting, repairing, and performing preventive maintenance on motor and engine driven generator sets, air conditioners, hydraulic test stands, air compressors, bomb-lifts, heaters, and other similar support equipment. You will also be taught equipment forms maintenance, use of technical data, use of common tools and hardware, and soldering techniques. back to top

You will inspect cargo and mail offered for airlift to verify eligibility and proper documentation, packaging, and marking according to applicable directives. You will determine quantity and type of cargo to be loaded according to allowable aircraft cabin load. You will load and unload aircraft using materials handling and loading equipment, check cargo against manifests, and annotate overage, shortage, or damage. You will complete documentation and reports required within the air transportation system to include air land and airdrop. You will prepare and maintain necessary forms for passenger travel and prepare weight and balance records. You will requisition, store, and issue expendable and nonexpendable items for use on aircraft. You will review travel authorizations for validity and accuracy and check in passengers and baggage. back to top

Download PDF BrochureAircraft have fuel systems similar to automobiles, but more complex. Aircraft fuel tanks are large enough for people to enter and you will work inside and outside of fuel tanks to remove, repair, inspect, install, and modify aircraft fuel systems, including integral fuel and water cell tanks, bladder cells, and external tanks.

You will advise on aircraft fuel systems removal, repair, and installation maintenance procedures and policies. You will diagnose fuel system and component malfunctions and recommend corrective actions and/or resolve problems.

In this job, you will perform maintenance on fuel tanks and cells by removing, repairing, and/or replacing malfunctioning components. Your job will also be to inspect aircraft fuel systems maintenance activities. Additionally, you will be responsible for cleaning fuel cells and tanks, and inspecting for foreign objects, corrosion, cell deterioration, and fungus.

You will learn about internal hardware such as valves, interconnects, lines, gauges, controls, pumps, and other attachments. You will also learn about sealing techniques and materials, layout drawing use, interpreting technical publications and concepts, and applications of maintenance directives. back to top

As an Aircraft Hydraulic Systems Apprentice, you will be responsible for everything dealing with the hydraulic systems on aircraft. You will troubleshoot, remove, repair, overhaul, inspect, and install the systems and their components, including support equipment.

You will advise on any problems maintaining these systems and determine maintenance procedures and performance characteristics using technical publications. Your job will also be to diagnose malfunctions and recommend what corrective action should be taken or else correct the defect yourself.

You will be responsible for inspecting the aircraft hydraulic systems, their components, and any support equipment. To ensure maximum performance of the systems, you will also be performing system operation checks, and taking corrective action, if necessary. back to top

Conducts education and training (E&T) tasks for maintenance, operations, and support training; education services; curriculum development; and instructor activities. Develops, delivers, and evaluates E&T programs and oversees E&T activities. back to top

EOD technicians safely handle live explosives on a daily basis. The profession is varied in mission and scope. It is extremely satisfying, but very demanding. EOD work begins in dangerous situations and ends in producing a safe solution. You apply classified techniques and special procedures to lessen or totally remove the hazards created by the presence of unexploded ordnance. You detect, identify, render safe, recover, and dispose of United States and foreign explosives and ordnance that are unsafe. This includes conventional military ordnance, criminal and terrorist homemade items, and chemical, biological, and nuclear weapons. Duties require you to work on the flight line during aircraft emergencies, on bombing ranges during range clearances, in munitions storage area accident areas, and in any other area or climate where an explosive hazard exists. You maintain equipment, technical data, and vehicles. There is paperwork and computer work to accomplish. EOD teams deploy in support of special operations and low/medium intensity conflicts. You also analyze unknown munitions and explosives for exploitation and use by the intelligence agencies. Some duties are dangerous, but you're trained and equipped to safely deal with the situations. Candidates must have determination and motivation to complete the school. Upon completing EOD School, you will become part of an elite group of highly trained technicians that have a proud heritage of protecting personnel and property from the effects of hazardous unexploded ordnance. back to top

You will operate and maintain heavy construction equipment. This equipment may include front-end loaders, road graders, bulldozers, dump trucks, skid steer loaders, backhoes, water trucks, forklifts, excavators, cranes, and multi-purpose sweepers. You will operate tractor-trailer combinations, transporting construction equipment and materials. You will also construct, maintain, and inspect concrete and asphalt runways, aircraft parking aprons, and roads. You will be operating small powered equipment, such as pneumatic hammers, air compressors, and vibrator tampers. You will install and maintain different types of security fencing. You will be required to ensure compliance with all safety and environmental regulations. Depending on the regional area, you may be involved with snow removal operations by operating snow blowers, plows, and power brooms. back to top

Security Forces secures the base perimeter, as well as ensuring the safety of all base weapons, property and personnel from hostile forces.

Security Forces personnel learn life-saving procedures; provide armed response; direct vehicle and pedestrian traffic on base; operate speed measuring, drug, alcohol and breath test devices; and conduct investigations. You will be involved in team patrol movements, tactical drills, battle procedures, and military operations other than war. You might also be apprehending and detaining suspects, securing crime scenes or testifying in judicial proceedings. back to top

You will construct, maintain, plan, and repair wooden, masonry, and concrete buildings and structures. You will construct and repair concrete footings, foundations, walls, floor slabs, piers, and columns for prefabricated and permanent structures. You will erect framework by placing, joining, and fastening sills, joists, sub-floors, studs, rafters, trusses, and wall and roof sheathing using hardware and fastening devices. You will install interior and exterior trim and finishing materials. You will lay structures according to blueprints, building plans, and other directives. You will apply mastics, repair or construct mortar beds and install floor and wall tile. You will adjust, troubleshoot, repair, and install locking devices on security containers.

You will install, construct, repair, and modify structures that are made of sheet metal. In addition, you will cut, measure, and join pieces using metal cutters, benders, and riveting equipment. You will also cut and join steel sections by using gas and electric welding equipment. Some things you may be working on include shower stalls, corrosion-resistant tables, fireproof partitions, metal roofing, metal siding, and guttering. You will inspect, maintain, and repair overhead, roll-up, personnel, hangar doors, and gates. back to top

Survival instructors undergo intense training in the following areas: instructional methods and skills, wilderness living, shelter construction, fire building, map and compass navigation, backpacking, food and water procurement, wilderness medicine and basic first aid, signaling and rescue techniques, escape and evasion, and prisoner of war (POW) resistance techniques. You train in all major climactic conditions; arctic, desert, tropical, ocean, and temperate. Survival Instructors are self-motivated go-getters responsible for teaching skills that save lives. You will be in a very physically, mentally, and technically demanding career field facing new challenges daily. back to top

Supervises and performs vehicle and vehicular equipment maintenance activities and functions, including diagnostics, repairs, rebuilding components and assemblies and fabrication of parts. Ensures compliance with vehicle maintenance policies, directives, and procedures. back to top

In the field of engineering you will be responsible for directing and performing civil engineering design, drafting, surveying, and contract surveillance to support Air Force facility construction and maintenance programs. You will prepare Computer Aided Design (CAD) drawings, specifications, and cost estimates, operating and maintaining Geographic Information Systems (GIS), as well as utilizing surveying technology to include Global Positioning system (GPS). You will perform drafting duties that include interpretation of rough engineering sketches in order to produce working drawings using CAD techniques and produce architectural, structural, civil, mechanical, and electrical drawings. Additional responsibilities include updating Base Comprehensive Plans (BCP) and the maintenance of record drawings, as well as plotting and reproducing drawings. back to top